• Overview
• TipsAndTricks

Capture App Examples

• Tune to channel 4 in the default profile and send MPEG transport stream to VLC at port 8802 and to a file at ~/out.m2t:
  • Shell 1:
    • vlc udp://@127.0.0.1:8802
    Shell 2:

    • cx88 -d /dev/cx88mpeg0 -u udp://localhost:8802 -u file://${HOME}/out.m2t -x /usr/local/share/examples/cx88/cx88.xml.sample -c 4

  Tune to channel 45 in the DVBT_EU_UHF profile, send MPEG transport stream to /home/user/out.m2t in current directory, and automatically terminate capture after 28.7 minutes:

  • cx88 -d /dev/cx88mpeg0 -u udp://localhost:8802 -u file:///home/user/out.m2t -x /usr/local/share/examples/cx88/cx88.xml.sample -c DVBT_EU_UHF:45 -n 28.7

  Capture audio only from channel 42 in the USA profile and send to sound card at /dev/dsp0:

  • cx88 -d /dev/cx88audio0 -u oss:///dev/dsp0 -x /usr/local/share/examples/cx88/cx88.xml.sample -c USA:42

  Capture audio only from channel 42 in the USA profile and use a third-party app to handle the actual playback:

  • cx88 -d /dev/cx88audio0 -x /usr/local/share/examples/cx88/cx88.xml.sample -c USA:42

Capturing Raw Video

• The best way I've found to capture raw video (e.g. from an analog TV station) is to use a named pipe to send the video frames to ffmpeg for encoding to an mpeg file. Future version of cx88 may have a live capture facility that can display the raw pixels directly to the screen (e.g. using SDL). The output from ffmpeg may also be piped into a player such as VLC for live viewing, but this is rather inefficient. Capture video and audio from channel 42 in the USA profile and send to ffmpeg for encoding via a named pipe:

  • Shell 1:
    • mkfifo vpipe
    • ffmpeg -f oss -ar 48000 -ac 2 -i /dev/dsp1 -deinterlace -b 10000k -pix_fmt yuv422p -s 640x480 -r 30 -f rawvideo -i ${HOME}/vpipe -vcodec mpeg2video -acodec libmp3lame -y ch42.mpg
    Shell 2:

    • cx88 -c 42 -d /dev/cx88video0 -u file://${PWD}/vpipe -d /dev/cx88audio0 -x /usr/local/share/examples/cx88/cx88.xml.sample

As in the above example, ffmpeg can be used to multiplex the audio and video output. The ffmpeg command above uses the OSS-compatible cx88 audio interface, and assumes that /dev/dsp1 is the OSS audio device that corresponds to cx88audio0. It also assumes that cx88video0 and cx88audio0 are the video and audio functions of the same capture card. Note that in the cx88 command, only the video data is sent to the named pipe.