== Currently Supported Hardware == In the following table, a DTV, video, or audio standard is listed as being supported only if full support is provided for it in the capture application. Even if a category is not supported, or your card is not even listed in the table below, the kernel modules for MPEG, video, and/or audio will likely recognize it as long as the relevant PCI functions are present on your card. However, the application does not yet have a definition that allows it to create the appropriate libtuner frontend devices for your card. || '''Card Name''' || '''MPEG''' || '''Video''' || '''Audio''' || '''Interface''' || || pcHDTV HD-3000 || ATSC || NTSC/composite/s-video || BTSC, FM radio || PCI || || pcHDTV HD-5500 || ATSC || NTSC/composite/s-video || BTSC, FM radio || PCI || || Hauppauge WinTV Nova-T PCI || DVB-T || || || PCI || || DViCO FusionHDTV 5 Gold || ATSC || || || PCI || || Club3D Zap TV2100 || DVB-T || || || PCI || || Conexant DVB-T Reference Design || DVB-T || || || PCI || || KWorld VStream XPert || DVB-T || || || PCI || || Terratec Cinergy 1400 || DVB-T || || || PCI || || Leadtek !WinFast DTV1000T || DVB-T || || || PCI || || Hauppauge WinTV-HVR-1100 || DVB-T || PAL/SECAM || NICAM || PCI || || Leadtek !WinFast DTV2000H || DVB-T || || || PCI || || Hauppauge WinTV-HVR-1300 || DVB-T || || || PCI || || Hauppauge WinTV-HVR-3000 || DVB-T || || || PCI || || Hauppauge WinTV-HVR-4000 || DVB-T || PAL/SECAM/composite/s-video || NICAM || PCI || || Hauppauge WinTV-HVR-1800 || ATSC || || FM radio, line-in || PCIe || || Hauppauge WinTV-HVR-1850 || ATSC || || FM radio, line-in || PCIe || || DViCO FusionHDTV 7 Dual Express || ATSC || || || PCIe || || Hauppauge WinTV PCI-FM (Note 1) || || NTSC/PAL/SECAM || BTSC/NICAM/FM radio/line-in (Note 2) || PCI || || ATI HDTV Wonder || ATSC || NTSC/composite/s-video || BTSC || PCI || Note 1: The WinTV PCI-FM goes by many names, including WinTV-radio. Any WinTV card with a 34xxx model number should work. Note 2: The WinTV PCI-FM does not support DMA audio; you must run a patch cable from the card's line-out to your soundcard's line-in jack. For Hauppauge tuner cards, there are often several revisions of a given model, and not all of them may be supported by the driver. In fact, some of them may not even be CX2388x-based. Konstantin Dimitrov has added support for these cards to the cx88 driver.